What is the best non-stick spray for snow blowers? A snow blower is your best companion during winter. It allows you to turn your snow-filled driveway into a comfortable and drivable space in a few minutes, while a snow shovel will leave you drained and take hours.
However, using a snow-blogger with a snow-clogged chute will make your job harder than it should be, especially if your area has wet and heavy snow. It is very frustrating trying to operate a new snowblower, only to end up being clogged.
Snowblowers are effective tools for clearing our walkways and driveways, but, like other machines, they need proper maintenance and care.
If your snowblower is your daily companion, then a non-stick spray for snowblowers should be your best friend.
In this guide, we’ve listed the 5 best non-stick sprays for snow blowers and some crucial tips to keep your machine in top shape.
How to Apply Non-stick Spray for Snowblowers
Although the non-stick spray is effective, it won’t save your tool if you don’t follow the proper application procedure. Fortunately, here are a few steps you should follow:
- Spray underneath the snowblower’s control buttons to repel water as you clear the dense snowfall.
- Next, try to adjust the chute deflector motor until you’re sure it’s sprayed lavishly. Then, for the chute rotation motor and the sprocket- you can spray them as they rotate.
- The gearbox, auger, impeller, impeller housing, and the discharge chute- you need to apply a measured amount.
For effective results, spray several coats of the non-stick spray. Spray the first layer and allow it to dry up before applying the second coat. Again, leave it to dry before applying the third coating.
How Non-Stick Spray for Snowblowers Work
A non-stick spray for snowblowers provides a slippery coating that prevents stick build-up. They have a quick-drying formula and dry completely in minutes, creating a sturdily-built protective shield on the blower chute assembly.
Consequently, snow and ice won’t lodge in the auger or chute during snow clearing and won’t be slowed down. The faster you move, the faster the plow piles flow through the snowblower and won’t get clogged easily.
More Tips to Keep Your Snowblower from Clogging Up
Use an Off-season Spray
Since snowblowers are seasonal tools, they spend most of their lives in the shed or garage. Therefore, it’s crucial to maintain your snowblower in the off-season so that it can last years. The best way to keep them well-maintained is by using an off-season spray. It is a non-hazardous and non-toxic spray made with a wool-wax combination.
Use Vegetable Oil
If you’re looking for a quick way to fix your snowblower or don’t have time to pick a non-stick spray, then try vegetable oil. However, this should be a final option if your driveway is inaccessible after a heavy snowfall. Vegetable oil isn’t very effective and has to be re-applied severally when using the machine. Additionally, this is not a long-term solution since it won’t last for long.
This may sound funny, but it works. Your chute is likely to get clogged when moving slowly. Moving faster will enable the auger to push snow at a greater force. If you’re struggling to get snow out without clogging, then you need to buy a more powerful tool.
Use a Clear-Out Tool
Another effective method to de-clog your tool is by using a clean-out tool. Use a plug-like object to eliminate any snow instead of bare hands. Most snowblowers come with a clean-out tool attachment. However, if yours lack one, you can purchase it.
Troubleshooting a Clogged Snow Blower
If a certain part gets jammed and the auger stops working, but the engine is still on, then the shear pin may be broken. These pins usually break under too much torque to protect your snowblower from more damage. However, shear pins are cheap and easy to replace.
If you’ve managed to keep your machine running season after season, then you understand the importance of conducting frequent maintenance. This ensures that your snowblower stays in excellent condition all year long. Most homeowners think that maintenance is costly, but it’s not and saves more time. Additionally, having replacement parts at home will reduce trips to the store and make your repairs hassle-free.
Best Non-Stick Spray for Snow Blowers Buying Guide
Before making the final decision, you should be keen on some factors in order to choose a product that will efficiently and quickly prevent snow clog up. Here are some factors you should consider:
The drying time of your non-stick spray depends on the humidity, specific product, moisture content, and the ambient temperature of the blower chute. A quick drying time will allow several applications in a short time, and you can apply a second layer if needed.
For effective results, apply snowblower spray in a dry and warm environment, like in a workshop or garage. Warmth will allow the spray to stick to the metal and dry fast.
This refers to the length of time the spray remains effective after application. If you have the one-time-use spray, you have to apply it before every use, which may take some minutes. Effective sprays allow the blower to clear snow severally before you lubricate the chute again. Although it’s advisable to apply non-stick spray before every use, most products are effective for up to 4 weeks. To achieve optimal lubrication and durability, you need to apply more than one coat of non-stick spray.
The main purpose of a snowblower is to prevent the snow from sticking and clogging the chute. However, most sprays have other benefits, like rust prevention, UV protection, and water resistance.
Ease of Application
The non-stick spray you choose should be simple to shake and apply and should last long without demanding fresh application.
Although these snowblower sprays prevent clogs, they have harmful chemicals that need to be handled with care. You should check the product’s label to determine the right way to use the spray and the possible hazards that comes with it. Always keep them out of reach of kids and pets and store them away from any source of heat.
Best Non-Stick Spray for Snow Blowers Reviews
The DuPont Teflon Non-Stick Dry-Film Lubricant Aerosol Spray will help reduce the sliding friction in the chute that can cause snow build-up and clog. This non-stick spray comes with a 100% dry-film Teflon and resin-bonded formula that stick to metal surfaces and dries fast to form a protective coating. This product is known to maintain the chute in perfect form and protect other metallic parts. This spray forms a strong layer that prevents water, ice, snow, dirt, and other chemicals from attaching and remains effective for up to 4 weeks.
- 10-ounce can
- 100% dry-film Teflon coating
- Creates a chemical resistant coating
- Effective for up to 4 weeks
- The lubricant is non-flammable after the solvent evaporates
- Not ideal for surfaces with silicone
The DuPont Teflon Snow and Ice Repellant is one of the most popular snowblower sprays out there. The best thing about this non-stick spray is that it forms an impregnable clear coating on the snowblower, thanks to its Teflon Fluoropolymer chemical compound. This spray is easy to apply, and you’ll spend less time scraping, clearing, and brushing any surface in the cold. Additionally, this non-stick spray for snowblowers can be used to coat satellite dishes to prevent ice and snow accumulation.
- 10-ounce can
- Teflon fluoropolymer
- Easy to apply
- Optimum non-stick performance
- Longer lubricant life
- Invisible coating
- Not a quick-drying spray
If you’re looking for a slippery lubricant that prevents clogs and eases the movement of ice and snow, this is a great choice. The Liquid Wrench M914 Silicone Spray comes in an 11-ounce container and should be applied in well-ventilated places since the vapors are flammable, and ingesting or inhaling the spray can be deadly. This snowblower spray is corrosion and rust-resistant, so the metal chute is highly protected. What’s more, this lubricant dries in a few minutes and can last for one week.
- 11-ounces can
- Silicone oil
- Petroleum distillate
- Safe on wood, plastic, rubber, vinyl, and metals
- Waterproof and rust-resistant
- Universal fit
- It can be hard to control when handling small jobs like door hinges
The Snow Wax Snow and Ice Repellent Coating for Snowblowers is a multi-purpose product that’s quick-drying and creates a long-lasting coat. It comes with quality nozzles that allow you to spray all components in a few minutes. This snowblower spray is designed to keep your machine looking new.
- 11-ounces can
- Quality nozzles
- Rust resistant
- Easy to use
- Multiple applications
- Highly flammable
The Other SNO-Jet Snow-Jet Snowblower Spray is a polymer-based treatment that works well under severe snow and ice conditions. With this snowblower spray, you’re likely to blow snow further while minimizing the risks of clogging. It comes with an aerosol-can design that is easy to use.
- Polymer-based product
- Aerosol-can design
- Ease to use
- Keeps your machine in top shape
- Reduces friction and clogging
Although a non-stick spray for snow blowers is a great investment, you need to blow the snow faster. This is because the snow may get stuck when the auger lacks sufficient force to push it out. Additionally, always follow the manufacturer’s instructions when using a new product. Good luck!